- Easy to use versatile manual filter system
- Switchable highpass / lowpass
- Gain to x50(+34 dB)
- Interface, signal level indication
The Kemo BenchMaster 21M is a versatile analogue electronic filter, with simple front panel setting. It is ideal for 'on site' work and general purpose laboratory filtering. The BenchMaster 21M has recently been completely redesigned, incorporating more gain, signal level indication, input overload indication, and it is now available in a wider range of filter responses. Inputs and outputs are front panel BNC connectors. The BenchMaster 21M uses the best quality components and achieves good channel matching and overall filter performance. It is available either as a single channel, stand alone, DC powered unit, or 1 - 9 channels in a rugged metal rack. An external computer interface is available, FICLII simple text commands over Ethernet hardware.
|Channels||1 per card|
|Control|| Manual Front panel switches / thumbwheel
Optional External control, 10BaseT text based FICL II interface. (19" rack only)
|Frequency (specified at order)|| 0.1 Hz - 980 Hz (3 ranges)
1.0 Hz - 9 800 Hz (3 ranges)
10 Hz - 98 000Hz (3 ranges)
|Gain||x1, x2, x5, x10, x20, x50 (+34dB)|
|Filters||Switchable Highpass / Lowpass|
|Filter Bypass||Yes ( frequency setting 99)|
|Filter Modifier||Yes Normal and Pulse ( not with all filter responses)|
|Filter Responses(specified at order)||03, 05 (Butterworths), 07, 09 (Bessels), 13 (anti-aliasing), 37, 41 (general purpose)|
|Input Coupling||AC / DC (Matched AC coupling on Differential Input)|
|Input Mode||Single Ended / Differential (set by on board jumper, but with full control by external interface)|
|IEPE||4mA 24V current source|
|Input Overload Indication||Indication of absolute input signal overload|
|Signal Level Indicator||Single 3 colour, 4 signal level, off / green / yellow / red.|
|Signal Level||+/- 10V pk-pk (Usually with 'headroom')|
|Card Size||2 series 21 slots (100 x 220 Eurocard)|
|Racks, Size and weight|| 21.18 Rack - 1 to 9 channels, 420 x 155 x 350mm (16.6x6.1x13.8"), 10 kg (22 lb) maximum.
21.1 Rack - 1 channel, 44 x 116 x 270 mm (1.7 x 4.6 x 10.7") 1 kg (2.2 lb) maximum
|Power|| 21.18 rack 90 -120 / 180-240 Vac 50/60Hz - Optional DC power
21.1 rack 9 - 30V DC power
Easy Manual Control
The BenchMaster 21M is designed for easy manual operation. The controls are laid out in an easy to understand logical way. All controls are on the laser cut and laser marked front panel.
In most cases the operation of the BenchMaster 21M is intuitive. Some of us at Kemo have been filter users, we have used Kemo products on site late at night cold and tired, so we like to keep things simple.
Filter frequency value set by up/down front panel switches
Frequency range set by front panel switch
|'Normal' filter response or modified 'Pulse' filer response||Highpass or Lowpass set by switch|
x1, x10 gain switch
x1, x2, x5 gain switch
Signal level indicator
|Input coupling and IEPE switch
Frequency Range 0.1Hz to 98 kHz (in 3 versions)
A BenchMaster 21M filter covers a frequency cutoff span of 9800:1, switchable highpass lowpass filter, three decades with two digit resolution. Three frequency versions are available, specified at order, these are:-
|0.1Hz - 980Hz||0.1Hz - 9.8Hz||1Hz - 98Hz||10Hz - 980Hz|
|1Hz - 9 800Hz||1Hz - 98Hz||10Hz - 980Hz||100Hz - 9 800Hz|
|10Hz - 98kHz||10Hz - 980Hz||100Hz - 9 800Hz||1kHz - 98kHz|
Filter cut-off frequency is set by two digit thumbwheels, and a 3 way decade switch.
Frequency setting '99' is filter bypass.
Frequency setting '00' activates the optional external control.
Lowpass / Highpass
Each channel can be independently set to highpass or lowpass filtering.
Gain and Signal Level Indication
The updated BenchMaster 21M has more gain. Two front panel switches give gain of x1, x2, x5 and x1, x10, operated in combination to give up to x 50 gain (+54dB). The front panel has a 4 stage signal level indicator, - 0%- off -10% - green - 70% - orange - 95% - red. An overall input overload indicator shows absolute signal input overloads. These indicators help setting the gain and input stages.
The BenchMaster 21M has been updated to add the standard range of Kemo filter responses.
These are:- Butterworth 4 pole(05), and 8 pole (03), Bessel 4 pole (09) and 8 pole (07),
Sharp anti-aliasing type, flat to filter cut-off, (13)
General purpose, flat to cut-off, linear phase(41)
General purpose 6 pole (37), compatible with earlier versions of the BenchMaster 21M ( or VBF 21M)
The filter response is specified at order, any questions about which one, contact us and we are pleased to advise you.
Pulse Filter Response Modifier
Each channel has a 'pulse' filter modifier setting, this modifies the filter response , optimising it to a minimum overshoot characteristic, which minimises signal overshoot for impulse type signals.
Note this function does not operate on all filter responses.
Block Diagram of BenchMaster 21M
|Optional External Control
BenchMaster 21M filters are fitted with control logic compatible with the Kemo
FICLII interface for external computer control. This is a text (ASCII) over a 10BaseT, RJ45 plug, Ethernet style hardware interface. This provides an operating system independent interface. the interface stores current data, verifies incoming commands, and then executes them. BenchMaster 21M filter cards, like other Kemo units, are receive only on the rack control bus. More than one filter card can be set to the same address, they will all execute the same command. So one command can set a group of cards to the same settings.
Simple text commands are used, the screen image shows typical commands sent via HyperTerminal.
igna,3,1 - sets channel 3, input gain block A to x1.
(BenchMaster 21 HyperTerminal screen capture shown on right.)
Typical response time to send commands to one channel and implement the settings is about 200mS. Typical response time to refresh all 64 channels is about 15 seconds.
The BenchMaster 21M uses a laser cut and marked stainless steel front panel. The circuit board is manufactured using the latest surface mount technology. It is even possible to turn off the LED indicators, for use in dark optical laboratories. This latest version is a complete redesign, and one that all the staff at Kemo have contributed to, it is a product we feel proud of, and after over 40 years of building filters one that has considerable expertise built into it.
Optional DC power
9-30V DC input is available as an option for the 21.18 rack. Please check our page about DC Power.